for Cold Climate Housing and much more

Found 38 results for the keyword ‘Screws’

  • Screw Drivers & wrenches -- a constantly changing assortment.

    One amazing note:  in 2012 all four of the tools shown here are still available.  The Makita will be a special order, but they still make it and I still love it.PICQUIC - the best multiple head storage & screw driver.Picquic has been around for a long time and besides a decent screwdriver and...
  • Repairing a cracked door jam.

    When a door jam cracks because someone forced the door it is often easier and just as sturdy to repair it rather than to replace it. To replace it requires removing and reinstalling the entire frame.Find screws long enough to reach at least one inch past the crack from one side or the other. 4 ...
  • What type of screws should you use on a cedar deck?

    Aluminium screws should not be used with pressure treated wood, and galvanised screws should not be used with Cedar. The tannic acid in the cedar reacts with the galvanisation.The photo shows special cedar coloured screws who's coating helps to resist rusting. Type 18-8 stainless steel would be...
  • Match sticks for filling screw holes.

    Tyler from Toronto, Ontario suggests that when a door hinges screw hole is warn out you can glue in match sticks to fill the hole and then put the screw back in.Match sticks, tooth picks, with and without glue have been used for years to tighten up screw holes. Sometimes simply putting a single ...
  • Getting curtain bracket holes in the right place on the wall.

    One of our viewers sent in this tip.Mark the wall where you want a curtain bracket.Cut a piece of wide masking tape perfectly square and tape it to the table.Place the curtain bracket into the corner of the masking tape and use a pencil to mark the screw holes on the masking tape. Now fix the ta...
  • Driving drywall screws - from screw drivers to machine guns.

    I love looking at the whole range of tools all designed to accomplish the same task. The least expensive get the job done, eventually. The top of the professional line get it done in the blink of an eye. How about hanging drywall?Driving drywall screws is actually a complicated task. You need...
  • Specialty Screws

    Andrew is restoring Toronto's Old City Hall, resetting, repairing even replacing some of those old sculptured blocks that sit high up on the wall.One of his challenges is making mortor that will act and look like the original stuff. One way that he accomplishes that goal is to grind up whate...
  • How do you get a warn slotted screw out?

    One way is with a product called Screw Grab. It is a gritty liquid that just fills in the slot and gives the screwdriver a chance to get a hold. It doesn't always work, but is a lot easier than drilling the screw out, so it is worth the first try.You can buy Screw Grab from Lee Valley Tools
  • Making Piano Hinges work

    Piano hinges are one of the strongest of the very discrete hinges available for lids and doors. The problem is that the screws often work themselves loose, or the heads of the screws prevent the hinge from closing completely.Use long screws, like 2-1/2" #6, even into the edge of half inch plywoo...
  • Spatula Tools & Plaster Washers

    Did you ever think of using old kitchen spatulas as wall protectors for pulling nails, or even as a nail puller itself. This segment developed a series of shop uses for common kitchen tools.And I show you the fantastic plaster washers, used to hold cracked or loose plaster in place. These wide ...