for Cold Climate Housing and much more

Found 56 results for the keyword ‘Maintenance’

  • How to keep rust off of a table saw.

    David from St. Catharines, Ontario suggests using a product called TopCote to keep your table saw free from rust. You got it right David -- this is the truly professional answer to the problem.Right up there for good performance is hard car wax -- because it won't come off on your wood and bothe...
  • A look at a bad roofing job and how to hire a roofing contractor.

    Annie has three roofs on her house, a shingled roof in the front part followed by an asphalt and gravel flat roof and then an elastomeric membrane flat roof over her back porch. They all seem to leak. The asphalt roof is only six years old, installed by someone who advertised in the local paper...
  • Keeping a central vac in good shape.

    Many people do not realize that it is necessary to clean out the bucket of a central vac as soon as it is half full, not only to keep it working properly but to avoid extra stress on the motor.Watch the suction level at every outlet. If it is weak, there is a clog someplace, which must be cle...
  • Extending the life of ice scrapers

    If there is one tool that everyone living in Northern United States, Canada and mountainous regions has it's an ice scraper for your car's windshield. And if there is one thing we all have in common, it's the fact that long before the end of the winter, it no longer scrapes well. So just like w...
  • Sharpening hand saws - Western and Japanese

    The first step in sharpening any hand saw is to sandwich it into a vise or between two pieces of wood that can keep the metal from vibrating, and driving you crazy, while sharpening. This is not just for comfort. If the blade vibrates too much, the file cannot dig into the metal.Next you ne...
  • Foam Gun Maintenance

    Foam guns are the air sealing tool of our epoch. We all use them. We all kill them. We all wish they would last longer and clog less. Of course there are as many different qualities of single component poly-urethane foam guns as there are different qualities of foams — at least we can be happy t...
  • Weather Restrictions: Acrylic Sealer for Asphalt Driveways

    Connect to your favourite weather forecaster and look for the following conditions:   Category: Asphalt     Product: Acrylic sealer for Asphalt Driveways Temperature Limitations: Above +10 C (+50 F) and below +30 C (+85 F) Rain Limitations: No rain for 24 hours Wind Limitations:  n/a Humidi...
  • Weather Restrictions: Asphalt Emulsion Sealer for Asphalt Driveways

    Connect to your favourite weather forecaster and look for the following conditions:   Category: Asphalt     Product: Asphalt emulsion sealer for Asphalt Driveways Temperature Limitations: Above +10 C (+50 F) and below +38 C (+100 F) Rain Limitations: No rain for 24 hours Wind Limitations:  n...
  • Automatic bleeders for radiators

    For various reasons, hot water heating systems can accumulate pockets of air in the top of the radiators. When there is too much air, the water doesn't flow any more and the heat slows down and stops. For that reason most people have to "bleed" the radiators regularly: open a little valve in the ...
  • Legality of DIY electrical and plumbing work

    NEW CONSTRUCTION In the interests of health and safety a number of trades are controlled by law, most particularly plumbing and electricity. The degree to which plumbing and electrical work are actually regulated varies from jurisdiction to jurisdiction. For instance almost all work performed in...