for Cold Climate Housing and much more

Found 19 results for the keyword ‘Polyurethane’

  • What glue will stick to what?

    Glue or Adhesive? What is the difference between a glue and an adhesive? Only vocabulary, although often Glue is the term used for DIYers and Adhesive for professionals -- or for some Glue is liquid and Adhesive is gunned from a tube with a caulking gun or applied with a notched trowel.  Whether...
  • Should I open the roof to fix the soffits?

    Gerry is reshingling an open beam low sloped roof that has always given him problems with ice dams. He wants to know if it is worth it to tear up the first four feet, install air sheets and replace the boards? Actually it is a great idea to perfect the over-the-wall section of the roof space any...
  • Techniques for hiding furniture and hardwood floor scratches.

    Scratches on furniture can often be camouflaged by any of a number of simple techniques, especially if the scratch follows somewhat the grain of the wood.   WIPE-ON POLY When there is no stain on the wood, so the finish is actually the natural colour of the wood, simply putting a bit more fini...
  • Fixing small cracks in a foundation wall.

    Randy in Winnipeg has found small cracks in a foundation wall and wants to know how to fix them. Right up front I want to make the statement that it is often not worth the bother to fix a small crack in a foundation wall that is not moving -- especially if no water is coming in.  The best way to...
  • BASEMENT: INTERIOR OR EXTERIOR INSULATION?

    It is always better to insulate on the outside of basements and crawl spaces, but usually more expensive and more trouble. Brick or field stone foundations must not be insulated on the inside for much more than one foot below ground level. The poor quality of the mortar in these foundations dete...
  • An alternative to ducting through the attic in a cold climate.

      In my experience, heating ducts that run through attics cause serious problems in snow country. Don't let a contractor talk you into it. In warm climates it is common practice to run heating and air conditioning ducting through attic spaces simply because it is easy to do. Unfortunately this ...
  • Rag applied clear polyurethane finishing.

    I bet you can imagine how many manufacturers send me products hoping that I will put them on TV. Well, here is one where I called MinWax and asked them to send me over some Wipe-On-Poly. I have fallen in love with this stuff. It is simply a clear polyurethane finish, but formulated to not gum up...
  • Getting a wobbly toilet to sit flat on the floor

    If you have a wobbly toilet because there is something uneven on the floor the ideal solution is to find a way to level the floor. If it is wood, you could shave it down to flat. If the problem is tiles, you could remove the tiles under the toilet. But often in real life, we don't want to do eith...
  • Sealing ductwork in an attic

    Often furnace heating and air conditioning duct work is run though an attic and then back down into the house. Personally I think that this is a really bad idea unless there is absolutely no alternative route. Why? First, most duct work is not sealed where it goes through the ceiling, so a lot o...