Connect to your favourite weather forecaster and look for the following conditions:
Category: Sealants (Caulking) Product: Thermoplastic Caulking / Sealant
Temperature Limitations: Above -30 C (-22 F) and below +40 C (104 F) -- keep product above +5 C (+40 F)
Rain Limitations: Dry befor...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Masonry Product: Brick Mortar
Temperature Limitations: Use above + 5 C (+40 F)
Rain Limitations: No standing water or wash out prior to setting
Wind Limitations: Protect mortar if wind will d...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Finishes Product: Oil or Alkyd Resin Paint
Temperature Limitations: Use above +10 C (+50 F) and below +32 C (+90 F)
Rain Limitations: No rain for 24 hours
Wind Limitations: Don't paint in hig...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Roofing Product: Elastomeric Sheet Membranes
Temperature Limitations: Material and workmen are most flexible above +10 C (+50 F) -- emergency repairs can be made down to -10 C (+14 F)
Rain Lim...
The trucker's hitch is one of the most useful of rope knots because it is quick, easy to set-up, easy to take down and allows you to sinch the load up tight. For those of you who missed the TV show, we tried to grab a few still shots to give you the step by step set-up for a trucker's hitch.
You...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Sealants (Caulking) Product: Polyurethane Caulking / Sealant
Temperature Limitations: Above + 5 C (+40 F)
Rain Limitations: No rain for 1 hour
Wind Limitations: n/a
Humidity Limitations: Mis...
Kim changed her furnace thermostat, only to watch the wires all fall into the hollow wall as she unhooked the last one. What a job to get them back.
So she advises us to wrap the first loose wire around a pencil before unhooking the rest, that way they will stay on this side of the wall.
With t...
Lime was the primary ingredient in most stains in the old days -- it was called a 'lime wash'. It can be used to stain all porous materials including masonry, concrete, and stucco without causing any of the moisture problems that modern finishes may cause.
Given the need to use traditional mater...
Don in Winnipeg wanted to make a wooden walkway. He wanted to fan the boards out at the 90 degree corner, but couldn't figure out how to calculate the angle to cut the boards to make them fit.
The first important reflection was that the center point of this fanning out should not be right in the...
The larger and wider the blade, the more power is required to drive it through wood. When we are talking about corded tools, this usually translates into a question of weight and over-all size of the saw. Using a very large and heavy saw for light duty work is simply cumbersome and tiring. When w...
