for Cold Climate Housing and much more

Drywall Repairs

This is a quick overview of using self-adhesive grills for patching holes.

Learning Curve 54


Add A Comment

  Your Comments

Showing 2 comments

Viewing from oldest to newest Reverse
Jon on June 18, 2010 20:14

The most important aspect of that electrical box is that it is solidly attached to something.  If it is screwed or nailed into a stud and you just have a gaping hole around it, then you can use any of the repair techniques to simply fill in up to the box.  If that box is hanging by its wires then you need to do more -- something to make it solid. 

Either find a way to attach it to a stud -- or if there is no stud near-by you will have to open the hole larger, install a solid piece of drywall and then use the techniques shown in the video for attaching Electrical Boxes with No Studs.

I hope this helps.

jon

Julie on June 13, 2010 12:03

I've been looking everywhere for a specific fix and cannot seem to find one. My ex cut a hole around the light switch leaving a hole in the wall exposing the electrical wires that run up to the ceiling. I have a light switch exposed with the drywall all cut away from it. Should I cut the hole larger and redo the electrical box hole like your video or should I piece the drywall into 4 around the electrical box?

Add A Comment

I encourage you to help develop the topic of this page by sharing your advice/comments/wisdom/personal experience/etc on this specific subject through the form below. Although I have developed most of this site with the encyclopedic concept of research and verification of information—I cannot vouch for anything contained in the comments below, but I may pick up, develop and include ideas put forward here into the primary entries. Please sign your name so we know who to give credit to. Your picture will show up next to your comment, here and elsewhere, if you sign up with Gravatar - jon

Please note that comments now need to be approved before appearing on the site to combat spam problems.
Sorry for the delay!